Tubeless Conversion Kit Bundle - Complete Setup Kit with Sealant

Tubeless Conversion Kit Bundle - Complete Setup Kit with Sealant

Converting to tubeless couldn't be easier with this complete Tubeless Conversion Kit Bundle. Everything you need for a professional tubeless setup in one convenient package.

What's Included

• 2x Velo-Tool tubeless valves (44mm or 60mm)
• Tubeless rim tape (25mm or 31mm width)
• Premium tubeless sealant
• Valve core removal tool
• Complete installation instructions

Key Features

• Complete conversion kit - Everything needed for tubeless setup
• Professional components - High-quality valves, tape, and sealant
• Multiple size options - Fits road, gravel, and MTB rims
• Easy installation - Clear instructions included
• Excellent value - Save compared to buying components separately

Specifications

• Valve lengths: 44mm (standard rims) or 60mm (deep section)
• Rim tape widths: 25mm or 31mm
• Includes premium tubeless sealant
• Compatible with all tubeless-ready systems
• Weight: Varies by configuration

Complete Tubeless Conversion Guide

Converting to tubeless tyres delivers superior puncture protection, lower rolling resistance, and the ability to run lower pressures for improved grip and comfort. This complete kit includes everything you need for a successful conversion.

Step-by-Step Conversion Process

1. Prepare Your Rims

Remove existing tyres and inner tubes completely. Clean the rim bed thoroughly, removing any old tape, dirt, or debris. The surface must be completely clean and dry for proper tape adhesion.

2. Apply Tubeless Rim Tape

Select the correct width tape for your rim (measure the internal width). Starting opposite the valve hole, apply the tubeless rim tape with firm, even pressure, ensuring no air bubbles or wrinkles. Overlap the starting point by 10-15cm and press firmly.

3. Install Tubeless Valves

Insert your tubeless valve through the hole in the tape. Hand-tighten the lock ring firmly - avoid over-tightening which can damage the tape seal.

4. Mount and Seat the Tyre

Install one bead of the tyre onto the rim. Before mounting the second bead, remove the valve core using a valve core removal tool. Use a high-volume pump or compressor to rapidly inflate the tyre. You should hear distinct 'pops' as each bead seats into the rim.

5. Add Sealant

Remove the valve core and inject 60-80ml for road tyres or 80-120ml for MTB tyres of Magic Milk Hi-Fibre sealant. Reinstall the valve core and inflate to desired pressure.

6. Distribute and Seal

Rotate and shake the wheel vigorously to distribute sealant evenly. You may see sealant weeping through the tyre casing - this is normal and will seal within minutes. Leave horizontal for 10-15 minutes to allow full sealing.

Maintenance

Check sealant levels every 3-6 months and top up as needed. For trail punctures, carry a tubeless repair tool for quick fixes.

With proper setup and maintenance, tubeless tyres provide superior performance and reliability for road, gravel, and mountain biking.